NEW
PRODUCT!
iRACK41U
36in Black Server Rack Cabinet with fans and filter
OVERVIEW
This 41U 36in Black Server Rack Cabinet offers a lockable,
dust-reduced environment for rackmount servers and network
equipment.
With exterior dimensions of H 75.5in x W22in x D35.5in
(cabinet only), this sturdy space-saving unit is made from
extruded aluminum for an appealing appearance. A standard
lockable smoked Plexiglas (see-through) front door and solid
aluminum rear door provide quick access to installed equipment.
The internal front and rear mounting rails are spaced to
accept standard 19in rackmount devices and are completely depth
adjustable as to be able to fit virtually any piece of equipment
that is less than 33in deep. A standard roof-mounted triple
motor AC fan unit and high-flow air filter below the rear door
provide up to 300 CFM of bottom to top air flow through the
cabinet, removing the heat produced by the enclosed equipment.
FEATURES In addition to the standard equipment that are
options on most other cabinets, this cabinet also has a full
complement of optional accessories like fixed shelving, storage
drawers, keyboard drawers, front panel spacer plates, and
slide-out shelves.
• Also comes with front flip-up stabilizers, removable
smoked acrylic front door with 2 keys, removable rear door and
50 Philips-head mounting screws
• Comes fully assembled
• Extruded aluminum construction provides rounded corners and
edges for an attractive appearance
• Front and back doors are removable and can be switched to
open left or right
• Fully forward/back adjustable mounting rails inside cabinet
• Includes (3) 5" ball bearing AC fans moving up to 300
CFM of air, air filter and adjustable levelers at each corner
• Many accessory options available like mounting shelves,
keyboard drawers, storage drawers, sliding shelves, front
blanking plates, etc.
• Rolling casters provide full mobility
$1425.00 CDN
$1375.00 US
OPTIONS
ES-01 Equipment Shelves (fixed) $52.00 CDN /US This
universal Server Rack Cabinet Shelf is a standard fixed shelf
for 19in rail width racks.
SS-01 22" Equipment shelves
(sliding)
$139.95 CDN /US These
shelves can be used as a sturdy sliding shelf, or a pull out drawer. As your
server cabinet needs change, this shelf changes to suit. Need to change the
drawer holding your keyboard or other input devices? Simply flip the installed
drawer over and it becomes a shelf to hold monitors, laptops and other
diagnostic equipment. An easy-to-hide handle pulls out to help you get a grip on
the situation and hides away quickly.
PB-0124 Outlet Power Bar $58.95
CDN /US This 24
outlet rackmount power strip provides a 0U solution for your
rackmount equipment and fits most 42U racks and equipment
cabinets. The 10ft power cord provides plenty of reach to power
outlets, and the 24 evenly spaced outlets help keep power
cabling clean and efficiently routed.
Wall
Mount - Smoked Glass Door - Ventilated Rack Cabinets (SWCC
Series)
-Optional Filter Kit
-Economic, light duty design - wall mount
- 19” rack cabinet.
-Overall depth of 550mm (21.6”)
includes 100mm (3.9”) deep wall mount sections and 450mm
(17.7”) deep hinged cabinet body
-Ventilated slots front & side.
-Body is hinged from wall mount
section - 3.9" (100 mm) depth
-Pre-punched top for optional fans.
-Wall mount section includes cable
access panels top & bottom.
-Both side panels are removable.
-Includes 2 - pair of mounting rails
(square hole punched - with starter pack of push in nuts).
-Includes smoked tempered glass door.
-Glass door opens a full 180 degrees
for easy access to rack mount equipment.
-Glass door is easily removable and
can be hinged either side.
-Glass door is complete with lock
& key.
-Shipped assembled - ready to install.
-Recommended maximum static load
weight - 130 pounds.
-Rugged black powder paint finish.
Part
Number
Panel
Height
Overall Height
Overall Width
Inches
Units
Inches
mm
Inches
mm
SWCC190-1021-BK2
10.50
6U
15.1
384
23.6
600
SWCC190-1521-BK2
15.75
9U
20.4
517
23.6
600
SWCC190-2121-BK2
21.00
12U
25.6
650
23.6
600
SWCC190-2621-BK2
26.25
15U
30.9
784
23.6
600
SWCC190-3121-BK2
31.50
18U
36.1
917
23.6
60
SWCC190-1021-BK2:
457.75 CDN
432.00 US
SWCC190-1521-BK2:
485.50 CDN
458.00 US
SWCC190-2121-BK2:
525.50 CDN
495.58.00 US
SWCC190-2621-BK2:
529.50 CDN
499.25 US
SWCC190-3121-BK2:
545.50 CDN
515.00 US
OPTIONS:
INDUSTRIAL FAN:
-3100 RPM
-34 dB
-32 cfm
FAN80FG
49.95 CDN/US
FK-01
FILTER KIT FOR FAN Complete with flame retardant ABS plastic grill and flame
retardant synthetic filter.
24.95 CDN/US
(Click image for larger
picture)
Technical Drawing
RMW-01
HEAVY DUTY Wall-mounted
Rack Cabinet
FEATURES
19” rack mount
3 hinged sections with quick
release latches
includes one pair of
infinitely adjustable - combination rack mount rails, on
E.I.A. universal spacing (5/8 - 5/8 - 1/2 inch) - drilled
& tapped for 10-32 screws
ventilated center section
lockable, smoked plexi front
door.
doors can be reversed hinged
(by removing both doors and rotating mid section)
lockable, rear wall mount
section with keyhole wall mounting
cable access knockouts top
and bottom
heavy duty construction, 14
gauge steel
100 lb. weight load capacity
powder paint textured black
finish.
Panel Height: 35"
Units: 20
Overall Dimensions: 38.5h x
21.38w x 26.63d
$795.00 CDN
$750.00 US
Optional accessories: RFA-03 3-Fan Tray $225.95 CDN/ US
